ISDN is a vital topic for today’s CCNA and CCNP candidates, especially for the ICND and Intro exams – you’ve got to know ISDN inside and out to pass those exams. Naturally you want to include it in your home lab. What many candidates don’t realize is that you can’t connect two Cisco routers directly via their Basic Rate Interface (BRI) interfaces you’ve got to have another device between them called an ISDN simulator.

An ISDN simulator is not one of those software programs pretending to be routers (”router simulators”) this is a piece of hardware that acts as the telephone company in your home lab. Older simulators come with preprogrammed phone numbers and SPIDs, where newer ones let you program the phone numbers you want to use. Either way, an ISDN simulator is great for your CCNA/CCNP home lab, because you can practice dial scenarios that actually work. And you get to troubleshoot the ones that don’t, which is also important to learn! )

You don’t need any special cables or connectors you just connect both of your routers’ BRI interfaces to the ISDN simulator with a straight-through cable and you’re ready to go.
Read the full story

When you’re studying for the CCNA and CCNP exams, you’ve got a lot of different choices when it comes to training. One popular choice is choosing one of the many “boot camps” and five-day in-person courses that are out there. I’ve taught quite a few of these, and while many of them are good, they do have drawbacks.

Of course, one is cost. Many employers are putting the brakes on paying for CCNA and CCNP boot camps, and most candidates can’t afford to pay thousands of dollars for such a class. Then you’ve got travel costs, meals, and having to possibly burn your own vacation time to take the class. Add in time away from your family and boot camps become impractical for many CCNA / CCNP candidates.

Another issue is fatigue. I enjoy teaching week-long classes, but let’s face facts – whether you’re training for the CCNA or CCNP exams, you’re going to get a lot of information thrown at you in just a few days. You’re going to be mentally and physically exhausted at the end of the week, and that’s when some boot camps actually have you take the exam! You’ve got to be refreshed and rested when you take the exam to have your best chance of success.

How can you get the benefit of an experienced instructor without paying thousands of dollars? By taking a Video Boot Camp! There are some high-quality computer-based training (CBT) courses out there, and these courses offer quite a few advantages for the CCNA and CCNP candidate. These courses run hundreds instead of thousands of dollars, and you can train on your own schedule. It is important for you to make and keep that schedule, but instead of spending thousands of dollars and having to travel, you can get world-class CCNA and CCNP training in the comfort of your own home.

By combining a high-quality CCNA or CCNP CBT or video boot camp with a strong work ethic, you’re on your way to passing the exam and accelerating your career. Now get to work!

CCNA and CCNP candidates are well-versed in Spanning-Tree Protocol, and one of the great things about STP is that it works well with little or no additional configuration. There is one situation where STP works against us just a bit while it prevents switching loops, and that is the situation where two switches have multiple physical connections.

You would think that if you have two separate physical connections between two switches, twice as much data could be sent from one switch to the other than if there was only one connection. STP doesn’t allow this by default, however in an effort to prevent switching loops from forming, one of the paths will be blocked.

SW1 and SW2 are connected via two separate physical connections, on ports fast0/11 and fast 0/12. As we can see here on SW1, only port 0/11 is actually forwarding traffic. STP has put the other port into blocking mode (BLK).

SW1#show spanning vlan 10

(some output removed for clarity)

Interface Role Sts Cost Prio.Nbr Type

Fa0/11 Root FWD 19 128.11 P2p

Fa0/12 Altn BLK 19 128.12 P2p

While STP is helping us by preventing switching loops, STP is also hurting us by preventing us from using a perfectly valid path between SW1 and SW2. We could literally double the bandwidth available between the two switches if we could use that path that is currently being blocked.
Read the full story